The blog of a retired marine engineer who is old enough to remember the steam era and the joys of holiday trips in trains hauled by steam engines. Please feel free to comment or contact me on teachertalk1234@yahoo.co.uk. The blog is updated daily so please look back or follow regularly so as not to miss information and pictures
Total Pageviews
Saturday, 16 November 2013
Friday, 15 November 2013
Strines cutting and the portal
It was a massive feat of engineering
I believe Queensbury tunnel is the Longest
deepest tunnel in England. The massive work
of digging through Illingworth moor through
to Queensbury is nearly two miles. The depth at
Strines cutting is some 60ft so the depth within
can be imagined from this picture.
I
Thursday, 14 November 2013
Monday, 11 November 2013
Sunday, 10 November 2013
Saturday, 9 November 2013
Strines cutting, a few more
Strines cutting shortly after track lifting
Lack of proper drainage maintainence caused the
cutting to gradually fill as infilling further down
the line to the south caused a damming effect.
Looking from the Tunnel portal South. The bridge is
the one carrying the culverted beck across the line
here from the culvert bridge we see the South portal
of Queensbury tunnel
The pumping out work before final infilling
Look at what remained ie the telegraph carriers
Many thanks to Phil D for some of the more recent
pictures
Strines Cutting
Hewn out of the rock below Illingworth Moor
Strines cutting was some 60+ deep. The bridge
carried a culvert which directed the Oveneden beck
over rather than to and through the railway cutting
The culmination of the cutting being the Southern
portal of Queensbury tunnel.
Shown here just before final filling in as water was
drained and permanent pipeworks laid to drain the tunnel
The bridge mention in the above picture which carries
Ovenden beck can still be seen here.
Subscribe to:
Posts (Atom)